Emagic Unitor 8 Driver

Emagic Unitor 8 Drivers
Emagic Unitor 8 Driver

Emagic Unitor 8 Drivers

21/12/05, Emagic Unitor8, AMT8 and MT4 MIDI Driver v1.5, Mac OS X. Unitor Family Driver 2.5 - For Apple Logic users. Download the latest versions of the best. Emagic Amt8 Usb Midi Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP. Uploaded on 3/14/2019, downloaded 4920 times, receiving a 86/100 rating by 2561 users.

Hello everyone

I have just installed ubuntu studio on a new PC following the demise of my old PC which was running Cubase SX /Creamware Luna on windows XP. The Creamware card is I iknow a non starter .
My question is regarding my emagic unitor 8 midi interface which is plugged into a serial card which the PC can see , lspci reveals:

Emagic Unitor 8 Driver

00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation C220 Series Chipset Family H81 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
05:00.0 USB controller: NEC Corporation OHCI USB Controller (rev 41)
05:00.1 USB controller: NEC Corporation OHCI USB Controller (rev 41)
05:00.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 02)
05:01.0 Serial controller: WCH.CN CH352 PCI Dual Serial Port Controller (rev 10)
alastair@alastair-All-Series:~$

IS there any chance of getting this interface to work or do I need to buy a modern one.

Many thanks in adavnce

Home‎ > ‎Audio & Midi‎ > ‎Midi‎ > ‎

Emagic AMT8 working under Windows 7 32bit

Make your AMT8 (and possibly your Unitor) work under windows 7 32bit using the serial connection!

Problem: The format of the drivers for the AMT8 and Unitor is no longer usable in Windows 7, and when Emagic was bought by Apple they obviously did not invest in future support of Windows users.

Solution: This involves some manual registry editing and possibly a bit of soldering if you don't have the original serial cable of the unit. The drivers, sounddiver-based editor and manual for the unit can be found @ the bottom of this page.

Software-side

I found the following info on the Steinberg forums, adapted it to my system and got the serial drivers installed and working under Windows 7 :-)

One BIG WARNING though: the registry keys contained in the files are those correct for MY PC and MY configuration, you must adapt them to yours. Backup EVERYTHING before, if you're not sure what you're doing.
Emagic amt8 (serial) Driver install (custom)
In Windows 7 32 bit:
- copy UNIS2K.dll in c:WindowsSystem32;
- copy UNIS2K.sys in c:WindowsSystem32drivers;
- start Regedit;
- go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E96C-E325-11CE-BFC1-08002BE10318};
- note down the last subkey number of that key;
- open amt8s_1.reg (contained in the attached zip file) with Notepad;
- 'Find and replace' every instance of '0XYZ' with last subkey number + 1;
(for example, if last subkey number is 0008, 'Find and replace' '0XYZ' with '0009');
- exit and save amt8s_1.reg;
- do the same with amt8s_2.reg (also contained in the attached zip file);
- double click on amt8s_1.reg;
- start Regedit;
- go to: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumRoot;
- right click on Root;

- NOTE: my Windows 7 version is localized in Italian; I don't know the exact English equivalent for the following steps, if you use the English Windows 7 localization;

- Autorizzazioni;
- Avanzate;
- Proprietario -> Modifica proprietario in:
- click on Paolo (Paolo-PCPaolo); this is my username on Windows, you must click on your username;
- OK;
- Utenti e gruppi -> click on DIRITTI PROPRIETARIO;
- enable Consenti -> Controllo completo;
- OK;
- double click on amt8s_2.reg;
- restore previous Proprietario;
- reboot;
- DONE!

One last thing: I absolutely don't guarantee this will work for you, do at your own risk! Anyway, please let me know should it work!

Paolo

If you do not have the original serial cable (anymore) you will have to make/adapt one yourself because the pinout of the serial cable is NOT standard. Many thanks to the Kymata Recording Studio for providing the following information:

AMT8 RS232 Wiring

WhenAppleboughtEmagicthey discontinued the AMT8 MIDI interface but you can still find them second hand.

They can be connected by USB or serial cable (serial cable has the advantage of longer cable runs) but beware, the serial cable required isn't a standardNull Modemtype cable and you wont be able to buy a ready made cable off the shelf. Perhaps the easiest way to make your own is to buy a Null Modem cable, cut one end off and rewire the end you cut off so that it corresponds with this diagram:

Pin numbers are normally embossed into the plastic next to the pins; you may need a magnifying glass to see them.

Patch management

The original cd-rom came with an application from Sounddiver that allows configuration of the stand-alone mode patches. Sadly this totally craps out in Windows 7, and runs very buggy in XP.

That is why i wrote a new editor using the Ctlr framework. For now only the midi-routing is implemented, but i will add the filtering matrix in the future. Find it here.

AMT8.rar

Because the firmware within the Unitor-8 is also held on the EEPROM, one simply loads the file from the control software while the Unitor-8 is connected to the host computer. The update is automatically done, making downloads of future revisions from Emagic’s Web page at www.emagic.de simple and easy.
Advanced Audio – Emagic Unitor 8 MKII Emagic Mt4 Driver Mac Os X Download 10. Emagic unitor 8, must still be in “new” condition, unopened, otherwise additional deductions may be made to compensate for loss of value item can no emagif be resold as “new”.